Golden Sand - Sandstone is a sedimentary rock composed mainly of sand-size mineral or rock grains. Like sand, sandstone may be any colour, but the most common colors are tan, brown, yellow, red, gray, and white. Some varieties are very hard, strong and durable, making them ideal for construction purposes.
Many are also resistant to weathering which makes them ideal for patios and paving.
Applications - floors and facades; tiles - all sizes available
Finish - honed, chiselled
GS’s product list:
- tiles & mosaics
- mouldings & 3D concepts
Golden Sand: review GS applications
Sandstone, based on its warm colors has good reception for floors in/out...
https://www.phoenixstoneworks.com/en/phoenix-stones/sandstone/golden-sand#sigProGalleria8c2f0780d5
Specification:
FINISHES | PC | MW | RW | IT | GS | G+S |
Honed | ||||||
Polish | ||||||
Split Face | ||||||
Straight Chisel | ||||||
Bush Hammer | ||||||
Sand Blasted | ||||||
Antique |
Product | Size | Thickness(cm) | Remarks: |
Cladding | 30x30 | 1,0 | Honed |
30x30 | 2,0 | Straight Lines | |
Cut Tiles | 30x30 | 2,0 | Honed |
40x40 | 2,0 | Honed | |
30x60 | 3,0 | Honed | |
40x60 | 3,0 | Honed | |
Bricks 10 | 10x20 | 2,0 | Honed |
Bricks 15 | 15x30 | 2,0 ; 3,0 | Honed |
Wall Planks | 10x60 cm | 2,0 ; 3,0 | Special Orders |
15x60 cm | 2,0; 3,0 | Special Orders |
G&S – Specification (physical and mechanical data sheet) | Standard Class | As per БДС | |
Volume Density | 2.58 g/cm³ | ||
Specific Density | 2.68 g/cm³ | ||
Water Absorption | 0,49 % | ||
Compressive Strength (in air dry) | 378,40 MРа | ||
Compressive Strength (in absorbed water) | 344,90 MPa | ||
Coefficient of Wear ’Duval’ | 5,50 % | ||
Frost-Resistance Coefficient | 0.80 | ||
Loss of mass after 25-hold freeze | 0,12 % | ||
Volume Porosity | 3,01 % |